The communication cable is used for direct serial communication with RTU, 9pin end connected to serial com port on PC (19200bd, Databits 8, Parity  None, Stop bits 1, Flow control None,   ascii setup - Send line ends with line feeds) 5pin Binder connection cable connected to pwr input of RTU A720SC communication cable is could be used with RTU A733, A733GSM, A723, A720. Cable could be used for troubleshooting, settings, testing, field telemetry tests and so on.

most used commands
freq	Frequency
slot (in combination with samples)	averaging intervall default 900
samples (in combination with slot)	amount of measurements during slot default 15 for A733, 3 for A72x
sst	sensor supply time default 2 (sec)
b	sends out broadcast , return a lsit of station detecting the "b"
blst	returns info about stations answers to the broadcaset (only A733/A723)
imme	init a immediate measurement to check sensor values connected to the RTU
info	returns info aouts basic settings of RTU
data	returns latest stored data slot (check time settings of RTU!)

Required Tool for Adcon Technicians and Distributor
asdf