The Adcon ACS-110 Charger is the ideal device to charge all Adcon NiCd and NiMH batteries with capacities of up to 7000 mAh.

The charger automatically detects the chemistry and the status of each battery within seconds, and selects the charging power and strategy suited best for the resp. battery. A push button provides a controlled refresh cycle, slowly discharging the battery and then fully recharging it again, thus eliminating the negative consequences of memory effect.

The device features a connector to plug into the internal batteries of Adcon's A720, A723, A731 and A733 RTU's. An optional adapter allows to connect batteries used with A730MD and A730SD devices. A 5-pin adapter cable with an integrated circuit that protects against excessive voltage but allows charging of batteries without opening the RTU, is also included.

Ordering information: 200.733.550

Battery -How-To :
Specifically when charging batteries with solar panels an optimum charge and discharge cycle can usually not be maintained, as is the case with most outdoor equipment. Over time memory effects can develop some negative effects reducing the batteries capacity. It is thus recommended to recondition batteries at least once a year. A reconditioning cycle will fully discharge and charge your battery at a slow pace. Repeat this cycle if your batteries are 2-3 years or older. This will help to extend the lifetime of your batteries and to bring them back to full charge.